Abass, Raghad U.
Re-Use of Glass Wool Fiber as New Composite Polyester System [Volume 36, 1B, 2018, Page 7-11]
Abbas, Laith K.
Multiple Performance Optimization of Carburized Steel Using Taguchi Based Moora Approach [Volume 36, 7A, 2018, Page 770-776]
Abbas, Laith K.
Optimization of Heat Treatment Parameters for the Tensile Properties of Medium Carbon Steel [Volume 36, 10A, 2018, Page 1091-1099]
Abbas, M.Y.
Design a Fuzzy PID Controller for Trajectory Tracking of Mobile Robot [Volume 36, 1A, 2018, Page 100-110]
Abbas, Ruaa H.
Green Synthesis, Characterization and Antimicrobial Activity of Titanium Dioxide Nanoparticles Using Laser Ablation Technique [Volume 36, 1C, 2018, Page 11-16]
Abbas, Rusul N.
Proposed Video Watermarking Algorithm based on Edge or Corner Regions [Volume 36, 1B, 2018, Page 25-32]
Abd, Jasim M.
Relationships between Actual Compressive Strength, Modulus of Elasticity and Non-Destructive Tests of High Strength Concrete [Volume 36, 2A, 2018, Page 117-124]
Abd alameer, Lubna A.
Fault Diagnosis in Wind Power System Based on Intelligent Techniques [Volume 36, 11A, 2018, Page 1201-1207]
Abd Almjeed, Sinan H.
The Approximate Solution of the Fornberg-Whitham Equation by a Semi-Analytical Iterative Technique [Volume 36, 2B, 2018, Page 120-123]
AbdAlsalm, Alyaa H.
Synthesis and Characterization Nano Structure of MnO2 via Chemical Method [Volume 36, 9A, 2018, Page 946-950]
Abd-Kadhum, Raheel J.
Evaluation and Improvement Performance of a Boiler in a Thermal Power Plant Using Artificial Neural Network [Volume 36, 6A, 2018, Page 656-663]
Abduallah, S.I.H.
Characterization of Liquid Produced from Catalytic Pyrolysis of Mixed Polystyrene and Polyethylene Terephthalate Plastic [Volume 36, 1A, 2018, Page 27-32]
Abdulghafour, Amjad B.
Developing a Branch and Bound Algorithm for Cell Formation and Group Scheduling [Volume 36, 5A, 2018, Page 555-563]
Abdulghafour, Amjad B.
Developing of Reliability-Centered Maintenance Methodology in Second Power Plant of South Baghdad [Volume 36, 8A, 2018, Page 842-852]
Abdul-Hamead, Alaa A.
Investigation the Effect of Nano–Particles and Recycling Mortar Additives on Physical and Mechanical Properties of Concrete [Volume 36, 3A, 2018, Page 295-303]
Abdul-Hamead, Alaa A.
Intelligent Modeling of Metal Oxide Gas Sensor [Volume 36, 7A, 2018, Page 777-783]
Abdul-Hussein, Aseel B.
Effect of Nano Carbon Tube on the Mechanical and Physical Properties of Composites Based on Resin Route [Volume 36, 4A, 2018, Page 410-416]
Abdul-Jaleel, Noor S.
Design and Implementation of a Two Stage Controller for Ball and Beam System Using FPGA [Volume 36, 4A, 2018, Page 381-390]
Abdulkader, Niveen J.
Effect of Nano BN Addition on the Properties of an Aluminum Metal Matrix Composite [Volume 36, 6A, 2018, Page 691-695]
Abdulkader, Niveen J.
Physical Properties Study on Ti-C/Nano-Ceramics Composite [Volume 36, 11A, 2018, Page 1185-1188]
AbdulKadir, Mohamed R.
Effect of High Temperature on Mechanical Properties of Rubberized Concrete Using Recycled Tire Rubber as Fine Aggregate Replacement [Volume 36, 8A, 2018, Page 906-913]
Abdul kareem, Shams. M.
Effect of Temperature and Concentration on the Optical Properties of PVC Solutions [Volume 36, 2B, 2018, Page 170-174]
Abdulkareem, Mais A.
Effect of Friction Stir Processing (FSP) to the Some Properties of Pure Copper Welded by Friction Stir Welding [Volume 36, 9A, 2018, Page 985-990]
Abdulkareem, Seevan F.
Design of Compact Dual-Mode BPFs Based on Cantor Fractal Geometry with U-Shaped Capacitive Coupling [Volume 36, 4A, 2018, Page 424-429]
Abdullah, Ali H.
Effect of CFRP Layer Orientation on the Behavior of Shear-Strengthened Steel Plate Girders [Volume 36, 7A, 2018, Page 709-714]
Abdullah, Ekhlas M.
Beneficiation of Low Grade Calcium Bentonite Claystone [Volume 36, 5A, 2018, Page 546-554]
Abdullah, Fouad A.
Influence of SAW Welding Parameters on Microhardness of Steel A516-Gr60 [Volume 36, 10A, 2018, Page 1039-1047]
Abdullah, Mohammed K.
Parametric Study on Intrinsic Reaction for Straight Run Heavy Naphtha Hydrodesulfurization over CoMo/Al2O3 Catalyst [Volume 36, 2A, 2018, Page 146-153]
Abdullah, Wrya A.
Effect of High Temperature on Mechanical Properties of Rubberized Concrete Using Recycled Tire Rubber as Fine Aggregate Replacement [Volume 36, 8A, 2018, Page 906-913]
Abdulmunem, Abdulmunem R.
Effect of V-Shape Twisted Jaw Turbulators on Thermal Performance of Tube heat exchanger: An Experimental Study [Volume 36, 11A, 2018, Page 1158-1164]
Abd Ul–Rzaq, Esraa K.
Experimental Design Electromechanical Machine to Produce Electricity by Vertical Dynamic Load [Volume 36, 8A, 2018, Page 878-886]
Abdulqader, Sarmad Sh.
Experimental Behavior of Self Compacting Concrete Corbels Strengthened with External CFRP [Volume 36, 2A, 2018, Page 154-162]
AbdulRaheem, Ruaa H.
Effect of Natural Fibers on Mechanical Properties of Polymer Composites [Volume 36, 10A, 2018, Page 1059-1067]
Abdul Rashid, Suraya
Potential of Ethylhexyl Ester Oil to Enhance Drilling of HTHP Wellbores [Volume 36, 1C, 2018, Page 30-37]
Abdulrazzaq, Zaidoon T.
Optimum Site Selection for Groundwater wells using Integration between GIS and Hydrogeophysical Data [Volume 36, 6A, 2018, Page 596-602]
Abdulridha, Aseel A.
Effect of Waiting Time before Re-vibration on Mechanical Properties of Fiber Reinforced Concrete [Volume 36, 7A, 2018, Page 748-758]
Abdulridha, Azhar J.
H-infinity Based Full State Feedback Controller Design for Human Swing Leg [Volume 36, 3A, 2018, Page 350-357]
Abdulsahib, Asaad D.
Grasping Force Controlling by Slip Detection for Specific Artificial Hand (ottobock 8E37) [Volume 36, 9A, 2018, Page 979-984]
Abdulsahib, Wael Sh.
Effect of CFRP Layer Orientation on the Behavior of Shear-Strengthened Steel Plate Girders [Volume 36, 7A, 2018, Page 709-714]
Abdulwaha, Qusai T.
Stress Intensity Factor in Hollow Square Sections Using Extended Finite Element Method [Volume 36, 2A, 2018, Page 196-201]
Abdulwahed, Ammar I.
Developing of Reliability-Centered Maintenance Methodology in Second Power Plant of South Baghdad [Volume 36, 8A, 2018, Page 842-852]
Abdulwahed, Mohanad N.
Analysis of Image Noise Reduction Using Neural Network [Volume 36, 1B, 2018, Page 76-87]
Abdul-Wahhab, Thamir M.
Reliability Evaluation of Al_Mansour 11kV Distribution Network in Baghdad City [Volume 36, 3A, 2018, Page 304-314]
Abdul-Wahhab, Thamir M.
Earth Fault Protection Failure in the Distribution Transformer 11/0.4 kV Supply [Volume 36, 4A, 2018, Page 391-400]
Abed, Akram H.
Effect of V-Shape Twisted Jaw Turbulators on Thermal Performance of Tube heat exchanger: An Experimental Study [Volume 36, 11A, 2018, Page 1158-1164]
Abed, Dalia B.
Removal of Cobalt (Co(II)) from Aqueous Solution by Amino Functionalized SBA-15 [Volume 36, 7A, 2018, Page 703-708]
Abid, Mohammad F.
Parametric Study on Intrinsic Reaction for Straight Run Heavy Naphtha Hydrodesulfurization over CoMo/Al2O3 Catalyst [Volume 36, 2A, 2018, Page 146-153]
Abid, Mohammad F.
Removal of Cr (VI) and Cu (II) Ions from Synthetic Wastewater by Solar Photocatalytic Reactor [Volume 36, 4A, 2018, Page 417-423]
Adulghafour, Amjad B.
Developing an Approach to Redesign Freeform Surfaces Using B-Spline Technique [Volume 36, 12A, 2018, Page 1213-1221]
Aghdeab, S.H.
Surface Roughness Evaluation in WEDM Using Taguchi Parameter Design Method [Volume 36, 1A, 2018, Page 60-64]
Aghdeab, Shukry H.
Effect of Current and Duty Factor for Different Electrode Shapes on Material Removal Rate in EDM [Volume 36, 6A, 2018, Page 633-640]
Ahmed, Ahmed M.
Specific Absorption Rate (SAR) Simulated for Square Patch Antenna of Head Tissues [Volume 36, 5A, 2018, Page 209-513]
Ahmed, Ahmed I.
A Comparative Analysis for Congestion Mechanism in COAP and COCOA [Volume 36, 8A, 2018, Page 867-877]
Ahmed, Athraa M.S.
Parametric Optimization of WEDM in Machining HSS (8X200) [Volume 36, 6A, 2018, Page 696-702]
Ahmed, Duha S.
Synthesis of Multi-Walled Carbon Nanotubes Decorated with Zinc Oxide Nanoparticles for Removal of Pathogenic Bacterial [Volume 36, 10A, 2018, Page 1075-1080]
Ahmed, Fayyadh H.
Frequency Reconfigurable Monopole Antenna Using Switchable Slotted Triangular Radiators [Volume 36, 2A, 2018, Page 185-195]
Ahmed, Ghuzlan S.
Determination of Radon Concentrations in Soil Around Al-Tuwaitha Site Using CR-39 Detector [Volume 36, 2C, 2018, Page 108-112]
Ahmed, Hayder S.
Design of Compact Multiband Microstrip BPF Based on Fractal Open-Ring Configuration [Volume 36, 8A, 2018, Page 887-890]
Ahmed, Hisham K.
Effect of Impact Hot- Dry Weather Conditions on the Properties of High Performance Lightweight Concrete [Volume 36, 3A, 2018, Page 262-273]
Ahmed, Riyadh A.
Reliability Evaluation of Al_Mansour 11kV Distribution Network in Baghdad City [Volume 36, 3A, 2018, Page 304-314]
Ahmed, Shayma J.
Effect of Particle Size on Mechanical Properties of the Recycling Compact Disks Reinforced Epoxy [Volume 36, 6A, 2018, Page 641-645]
Al-Adili, Aqeel Sh.
Study The Effect of Traditional Iraqi Stabilizers (Cement and Lime) on Some Properties of Iraqi Clay Soils [Volume 36, 3A, 2018, Page 248-255]
Al-Adili, Aqeel Sh.
Comparison Between Deterministic and Stochastic Interpolation Methods for Predicting Ground Water Level in Baghdad [Volume 36, 12A, 2018, Page 1222-1225]
Al-Ajeel, Abdul-Wahab A.
Studying the Efficiency of Lime-Soda Sinter Process to Extract Alumina from Colored Kaolinite Ores Using Factorial Technique of Design of Experiments [Volume 36, 5A, 2018, Page 500-508]
Al-Ajeel, Abdul-Wahab A.
Beneficiation of Low Grade Calcium Bentonite Claystone [Volume 36, 5A, 2018, Page 546-554]
Al-Alawy, I. T.
Measurement of Radon Gas Concentrations and Hazard Effects in Underground Water Samples in Karbala Governorate of Iraq [Volume 36, 2C, 2018, Page 118-122]
Al-Alkawi, Hussain J.
Mechanical Properties of Al 6061/Al2O3 Nanocomposite by Stir Casting [Volume 36, 3A, 2018, Page 328-332]
Al-Alkawi, Hussain J.
Effect of Corrosion Time on Critical Buckling Load of AISI 304 Columns [Volume 36, 7A, 2018, Page 742-747]
Al-Alkawi, Hussain J.
Microstructure and Electrical Conductivity of 7075Al alloy/SiC Nano Composites [Volume 36, 10A, 2018, Page 1034-1038]
AL Alkawi, Hussain J.
Characterization of AA 6061–Alloy Composites Reinforced by Al2O3 Nano Particles Obtained by Stir Casting [Volume 36, 7A, 2018, Page 792-797]
Al Anbari, Riyad H.
The Use of Photocatalytic Cementitious Coatings to Reduce Nitric Oxide from Ambient Air [Volume 36, 1C, 2018, Page 17-21]
Al-Anbari, Riyad H.
Studies on Characterization of Sawdust for Application in a Gasification Process for Syngas Production [Volume 36, 10A, 2018, Page 1022-1026]
Al-Anbari, Riyad Hassan
Preparation and Characterization of TiO2 Nanoparticles and its Applications as Antibacterial Agents [Volume 36, 10A, 2018, Page 1068-1074]
Al-Anbari, Riyad H.
Potential of Alfalfa for Use in Phytoremediation of Soil Polluted with Total Petroleum Hydrocarbons [Volume 36, 1C, 2018, Page 1-4]
Al-Anbari, Riyad H.
Studying the Effect of Ambient Temperature on Wastewater Degradation in Simulated Self-Purification Aerated Sewer System [Volume 36, 1C, 2018, Page 5-10]
AL- Anbari, Riyad H.
Synthesis of Multi-Walled Carbon Nanotubes Decorated with Zinc Oxide Nanoparticles for Removal of Pathogenic Bacterial [Volume 36, 10A, 2018, Page 1075-1080]
Alani, Rana R.
Assessment of Some Heavy Metal Concentrations in Drilling Mud samples in Az Zubair Oil Field, Basra, Iraq [Volume 36, 1B, 2018, Page 68-75]
Al-Attar, Akeel A.
The Effect of Addition of CeO2 Nanoparticles on the Microstructure and Mechanical Properties of Ti-Al-Mg Compact Samples [Volume 36, 11A, 2018, Page 1189-1195]
Al-Attar, Tareq S.
Workability of Hybrid Fiber Reinforced Self-Compacting Concrete [Volume 36, 2A, 2018, Page 111-116]
Al-Attar, Tareq S.
Flexural Behavior of RC Beams Strengthened by NSM-CFRP Laminates or Bars [Volume 36, 4A, 2018, Page 358-367]
Al-Attar, Tareq S.
Resistance of High-Volume Fly Ash Self-Compacting Concrete to Internal Sulfate Attack [Volume 36, 12A, 2018, Page 1260-1266]
Alawey, Sahar Z.
A Mixture between Rule 90 and Rule 150 Cellular Automata as a Test Pattern Generator [Volume 36, 9A, 2018, Page 951-956]
Al Azawi, Razi J.
Select the Best Cyclic Prefix for Various Effective Area in an O-OFDM System [Volume 36, 5A, 2018, Page 488-492]
Al-Azawi, Khalida F.
Corrosion Inhibition of Mild Steel in Hydrochloric Acid Solution by an Isatin-aniline Compound [Volume 36, 2B, 2018, Page 98-103]
Al-Azawi, Khalida F.
Levels of Lead and Chromium Ions in Different Brands of Lipstick Sold at Local Markets in Iraq [Volume 36, 2B, 2018, Page 147-151]
Al baiaty, Hadeel A.
Physical Properties Study on Ti-C/Nano-Ceramics Composite [Volume 36, 11A, 2018, Page 1185-1188]
Al-Bakri, Salih A.
Environmental Impact Assessment for Brick Factory in Baghdad, Iraq [Volume 36, 1C, 2018, Page 38-48]
Al-Barazanjy, Mohammed G.
Ultrasonic Technique in Treating Wastewater by Electrocoagulation [Volume 36, 1C, 2018, Page 54-62]
Albayati, Talib M.
Removal of Cobalt (Co(II)) from Aqueous Solution by Amino Functionalized SBA-15 [Volume 36, 7A, 2018, Page 703-708]
Albayati, Talib M
Biosorption Technique for Naphthalene Removal from Aqueous Solution By Chara sp., Algae [Volume 36, 9A, 2018, Page 1008-1015]
Al-Bayati, Nabeel
Experimental Behavior of Hybrid Steel and Polypropylene Fiber Reinforced Concrete Deep Beam Containing Openings [Volume 36, 2A, 2018, Page 163-171]
Al-Dabbagh, Balkees D.
Preparation, Characterization and Utilization of Polyacrylamid-Kaolin Composite in the Removal of Nickel Ions From Water [Volume 36, 1C, 2018, Page 86-93]
Al-Ebrahimy, Sadiq N.
Production of Lightweight Clay Bricks Using Polymer Wastes [Volume 36, 8A, 2018, Page 823-831]
AL-Gebori, Abdulnasser M.
Levels of Lead and Chromium Ions in Different Brands of Lipstick Sold at Local Markets in Iraq [Volume 36, 2B, 2018, Page 147-151]
Al Ghaban, Ahmed M.
Study The Effect of Micro CaCO3 and SiO2 and their Mixture on Properties of High Strength Concrete [Volume 36, 10A, 2018, Page 1027-1033]
Al-Ghaban, A.
Aluminum Concentration Drives the Structural Evolution of Magnetron Sputtering (Ti, Al) C Thin Film [Volume 36, 1A, 2018, Page 70-74]
Al-Ghaban, Ahmed
Investigation of Addition Different Fibers on the Performance of Cement Mortar [Volume 36, 9A, 2018, Page 957-965]
Al-Ghaban, Ahmed M.
Physical Properties Study on Ti-C/Nano-Ceramics Composite [Volume 36, 11A, 2018, Page 1185-1188]
Al-Haidary, J.T.
Bio and Mechanical Evaluation of an Enhanced Bio Glass [Volume 36, 1A, 2018, Page 65-69]
Al-Hamdani, Ali H.
Design and Performance Analysis of Contact Lens Materials for Chromatic and Polychromatic Aberrations Correction [Volume 36, 9A, 2018, Page 1016-1021]
Al-Hassani, Emad S
Investigation of Microstructure and Chemical Analysis Along Weldments AISI 410 MSS/ER Nicrmo-3 [Volume 36, 5A, 2018, Page 564-573]
AL-Hassani, Emad S.
Effect of Nano Carbon Tube on the Mechanical and Physical Properties of Composites Based on Resin Route [Volume 36, 4A, 2018, Page 410-416]
Al-Hiyaly, Sedik A.K.
Determination Emitted Gasses from Using Three Types of Woods in Grilling Meats [Volume 36, 2C, 2018, Page 113-117]
Ali, Alaa H.
Effect of Aging Time on Deformation Behavior of Lead-Free and Lead Base Solders Alloys [Volume 36, 8A, 2018, Page 853-866]
Ali, Ammar A.
Strength Evaluation of Hybrid Reinforced Concrete Columns under Eccentric Loads [Volume 36, 4A, 2018, Page 449-455]
Ali, Awatif M.
Studying of Buckling Behavior on Composite Material [Volume 36, 3A, 2018, Page 322-327]
Ali, Ekbal H.
Numerical and Experimental Study of Cooling in Desktop Computer with Block Heat Sink [Volume 36, 4A, 2018, Page 430-438]
Ali, Entesar H.
Evaluation of purified urease activity from Proteus mirabilis using iron oxide nanoparticles and measurement of urea concentration in blood [Volume 36, 2B, 2018, Page 152-155]
Ali, Hazem I.
H-infinity Based Full State Feedback Controller Design for Human Swing Leg [Volume 36, 3A, 2018, Page 350-357]
Ali, Hazem I.
Full State Feedback 𝐇𝟐 and H-infinity Controllers Design for a Two Wheeled Inverted Pendulum System [Volume 36, 10A, 2018, Page 1110-1121]
Ali, H.I.
H-infinity Model Reference Controller Design for Magnetic Levitation System [Volume 36, 1A, 2018, Page 17-26]
Ali, Muammar H.
Comparison Between Deterministic and Stochastic Interpolation Methods for Predicting Ground Water Level in Baghdad [Volume 36, 12A, 2018, Page 1222-1225]
Ali, Mustafa Q.
A Proposed Method for the Sound Recognition Process [Volume 36, 8A, 2018, Page 939-945]
Ali, Salah M.
Parametric Study on Intrinsic Reaction for Straight Run Heavy Naphtha Hydrodesulfurization over CoMo/Al2O3 Catalyst [Volume 36, 2A, 2018, Page 146-153]
Ali, Wissam
Robust Visual Lips Feature Extraction Method for Improved Visual Speech Recognition System [Volume 36, 2A, 2018, Page 136-145]
Ali, Yossra H.
Text File Hiding Randomly Using Secret Sharing Scheme [Volume 36, 1B, 2018, Page 1-6]
Al-Jumaili, Kareem K.
Studying the Effect of Ambient Temperature on Wastewater Degradation in Simulated Self-Purification Aerated Sewer System [Volume 36, 1C, 2018, Page 5-10]
Alkadir, Israa A.
Optimization of Dry Sliding Wear Process Parameters for Al-Mg-Si Hybrid Composites Using Taguchi Method [Volume 36, 7A, 2018, Page 812-822]
Al-Kaisi, Awf
Development Bearing Capacity of Piles Embedded in Clayey Soil [Volume 36, 3A, 2018, Page 315-321]
Al-Kaisi, Awf
Comparison of the Behavior for Free Standing Pile Group and Piles of Piled Raft [Volume 36, 4A, 2018, Page 373-380]
Al-Kaisy, Hanna A
Effect of Inhibition by Honey on Corrosion Behavior of Composite Materials from Al-4% Si Alloy Reinforced with Y2O3 Particles [Volume 36, 11A, 2018, Page 1208-1212]
Alkhafaji, Aya N.
A Compact Dual-Band BPF Based on Open Loop Resonator for Satellite Communication Applications [Volume 36, 9A, 2018, Page 997-1001]
AL-Khafaji, Mohanned M.
Modeling of Continues Laser Welding for Ti-6Al-4V Alloys Using COMSOL Multiphysics Software [Volume 36, 8A, 2018, Page 914-918]
Al-Khateeb, Tala A.
Studying the Effect of Ambient Temperature on Wastewater Degradation in Simulated Self-Purification Aerated Sewer System [Volume 36, 1C, 2018, Page 5-10]
Al-Kindi, Luma A.H.
Optimization of Economic and Environmental Perspectives for sustainable Product Design and Manufacturing [Volume 36, 1C, 2018, Page 94-102]
AL-Kindi, Luma A.
Applying Fuzzy Multi-Criteria DecisionMaking and Different Techniques to Solve Multi Objective Project Planning [Volume 36, 5A, 2018, Page 533-545]
Al-Mahaidi, Riadh
Flexural Behavior of RC Beams Strengthened by NSM-CFRP Laminates or Bars [Volume 36, 4A, 2018, Page 358-367]
Al-Majidi, Basim H.
Difference and Contradiction of Critique Methods to Produce Styles of Modulation in Architecture: (Architect Peter Eisenman as Example) [Volume 36, 11A, 2018, Page 1122-1143]
Al-Mashhady, Athmar A.
Assessment of Some Heavy Metal Concentrations in Drilling Mud samples in Az Zubair Oil Field, Basra, Iraq [Volume 36, 1B, 2018, Page 68-75]
AL-Mashhady, Athmar A.M.
Ecological Risk Assessment of Chromium Pollution in the Soil of Industrial Area within Baghdad City [Volume 36, 1C, 2018, Page 49-53]
AL-Muifraje, Mahmuod
Design and Analysis of American Sign Language Classifier Based on n-tuple Technique [Volume 36, 2A, 2018, Page 172-178]
Almukhtar, R.S.
Characterization of Liquid Produced from Catalytic Pyrolysis of Mixed Polystyrene and Polyethylene Terephthalate Plastic [Volume 36, 1A, 2018, Page 27-32]
Al-Mukhtar, Ahmed M.
Investigate the Effect of Different Kinds of Discontinuous Fibers on the Mechanical Properties of Epoxy Matrix Composite Materials [Volume 36, 5A, 2018, Page 520-522]
Al-najjar, Samih K.
Effect of Corrosion Time on Critical Buckling Load of AISI 304 Columns [Volume 36, 7A, 2018, Page 742-747]
AL-Nuaimi, Muna K.
The Role and Important of Internet of Things in Building Sustainable City [Volume 36, 1C, 2018, Page 22-29]
Al-Nuzal, Saadi M.D.
Environmental Impact Assessment for Brick Factory in Baghdad, Iraq [Volume 36, 1C, 2018, Page 38-48]
Al-Obaidy, Abdul Hameed M.J.
Studies on Characterization of Sawdust for Application in a Gasification Process for Syngas Production [Volume 36, 10A, 2018, Page 1022-1026]
Al-Obaidy, Abdul Hameed M.J.
Potential of Alfalfa for Use in Phytoremediation of Soil Polluted with Total Petroleum Hydrocarbons [Volume 36, 1C, 2018, Page 1-4]
Al- Obiady, Abdul Hamid M. J.
Assessment of Some Heavy Metal Concentrations in Drilling Mud samples in Az Zubair Oil Field, Basra, Iraq [Volume 36, 1B, 2018, Page 68-75]
Alqaisy, Mushtaq A.
A Compact Dual-Band BPF Based on Open Loop Resonator for Satellite Communication Applications [Volume 36, 9A, 2018, Page 997-1001]
Alrays, Rend N.
Select the Best Cyclic Prefix for Various Effective Area in an O-OFDM System [Volume 36, 5A, 2018, Page 488-492]
Alrubaie, Ghaidaa
The effects of Cyanobactrum Chroococcus Minor and Oscillatoria amonea on Seed Germination of Plant Vigna radiate [Volume 36, 2C, 2018, Page 103-107]
Al-rubaiey, Najem A.
Ultrasonic Technique in Treating Wastewater by Electrocoagulation [Volume 36, 1C, 2018, Page 54-62]
Al-Saadawi, Baneen A.
Difference and Contradiction of Critique Methods to Produce Styles of Modulation in Architecture: (Architect Peter Eisenman as Example) [Volume 36, 11A, 2018, Page 1122-1143]
Al-Salihi, Huda A.
Mechanical Properties of Al 6061/Al2O3 Nanocomposite by Stir Casting [Volume 36, 3A, 2018, Page 328-332]
Al-Salihi, Huda A.
Investigation Vibration Damping in the Hydraulic Systems by Using an Accumulator [Volume 36, 12A, 2018, Page 1267-1282]
Al-Shathr, Basil Salah
Experimental Behavior of Self Compacting Concrete Corbels Strengthened with External CFRP [Volume 36, 2A, 2018, Page 154-162]
Al-Shathr, Basil S.
Flexural Behavior of RC Beams Strengthened by NSM-CFRP Laminates or Bars [Volume 36, 4A, 2018, Page 358-367]
Al-Sudani, Hussein I.
Hydraulic Parameters of Groundwater Aquifers in Khan-Al-Baghdadi Area [Volume 36, 2B, 2018, Page 136-146]
Al-Sulaifanie, Bayez K.
Frequency Reconfigurable Monopole Antenna Using Switchable Slotted Triangular Radiators [Volume 36, 2A, 2018, Page 185-195]
ALSultan, Thaer F.
Influence of Fracture Parameter on the Shear Lips for 080M40 Carbon Steel in Charpy-v Impact Resistance at Different Temperatures [Volume 36, 6A, 2018, Page 646-651]
Al-Taie, Ahmed S.
Determination Emitted Gasses from Using Three Types of Woods in Grilling Meats [Volume 36, 2C, 2018, Page 113-117]
Al-Temimay, Israa A.
Comparison between the Biological Activity of Agaricus bisporus Fruiting Bodies and Albizzia lebbeck Leaves Extract against Different Pathogenic Microoganisms [Volume 36, 2B, 2018, Page 166-169]
Alwan, I.A.K.
Accuracy Assessment of World View-2 Satellite Imagery for Planimetric Maps Production [Volume 36, 1A, 2018, Page 1-9]
Alwan, Layla L.
Seasonal Variation of Residual Aluminum Concentration in Drinking Water [Volume 36, 1C, 2018, Page 63-70]
Alwan, Nahla F.
The Role and Important of Internet of Things in Building Sustainable City [Volume 36, 1C, 2018, Page 22-29]
Al Zubaidi, Aseel B.
Study The Effect of Micro CaCO3 and SiO2 and their Mixture on Properties of High Strength Concrete [Volume 36, 10A, 2018, Page 1027-1033]
Al_Zuheri, Hala A.
Optimization of Economic and Environmental Perspectives for sustainable Product Design and Manufacturing [Volume 36, 1C, 2018, Page 94-102]
Ameen, Kayser A.
Fatigue Life and Surface Hardening Investigation of Aluminum Shot Peening Process [Volume 36, 6A, 2018, Page 672-676]
Ameen, Zinah J. M.
Employee Performance Assessment Using Modified Decision Tree [Volume 36, 7A, 2018, Page 806-811]
Amin, Sahar A.
Assessment of Some Heavy Metal Concentrations in Drilling Mud samples in Az Zubair Oil Field, Basra, Iraq [Volume 36, 1B, 2018, Page 68-75]
Amin, Samir A.
Using RSM Technique for Modeling and Optimization the Influence of Cutting Parameters on Tool Wear and Cutting Forces in Turning Operation [Volume 36, 3A, 2018, Page 243-247]
Amin, Samir A.
Experimental Study of Mechanical Properties of Type Linear Low Density Polyethylene and Mold Design [Volume 36, 5A, 2018, Page 493-499]
Amin, Samir A.
Influence of SAW Welding Parameters on Microhardness of Steel A516-Gr60 [Volume 36, 10A, 2018, Page 1039-1047]
Anead, Hosham S.
Evaluation and Improvement Performance of a Boiler in a Thermal Power Plant Using Artificial Neural Network [Volume 36, 6A, 2018, Page 656-663]
Anead, Hosham S.
Experimental Design Electromechanical Machine to Produce Electricity by Vertical Dynamic Load [Volume 36, 8A, 2018, Page 878-886]
Arbilei, Marwan N.
Mechanical Properties Modeling and Optimization for Polymeric Matrix Hybrid Bio Composite for Scaffolds Application [Volume 36, 12A, 2018, Page 1226-1235]
Arbilei, M.N.
Bio and Mechanical Evaluation of an Enhanced Bio Glass [Volume 36, 1A, 2018, Page 65-69]
Arbilei, M.N.
Composition Design Modeling and Experimental Verification of (Co Ni Al) Shape Memory Alloys [Volume 36, 1A, 2018, Page 84-88]
Assafli, Hayder T.
Effects of Enhancement P+ Layer on IGBT Operation [Volume 36, 5A, 2018, Page 582-585]
Atallah, Marwa S.
Effect of Nano Carbon Tube on the Mechanical and Physical Properties of Composites Based on Resin Route [Volume 36, 4A, 2018, Page 410-416]
Atiyah, Ibrahim A.
Investigate the Effect of Different Kinds of Discontinuous Fibers on the Mechanical Properties of Epoxy Matrix Composite Materials [Volume 36, 5A, 2018, Page 520-522]
Azeez, Hanan K.
Optimization of Dry Sliding Wear Process Parameters for Al-Mg-Si Hybrid Composites Using Taguchi Method [Volume 36, 7A, 2018, Page 812-822]
Aziez, Sameir A.
Microstructure and Electrical Conductivity of 7075Al alloy/SiC Nano Composites [Volume 36, 10A, 2018, Page 1034-1038]
Aziz, Nadia ahmed
Optimum Site Selection for Groundwater wells using Integration between GIS and Hydrogeophysical Data [Volume 36, 6A, 2018, Page 596-602]
B
Bakhy, Sadeq H.
Influence of SAW Welding Parameters on Microhardness of Steel A516-Gr60 [Volume 36, 10A, 2018, Page 1039-1047]
Baqer, Ihsan A.
Grasping Force Controlling by Slip Detection for Specific Artificial Hand (ottobock 8E37) [Volume 36, 9A, 2018, Page 979-984]
Baqir, Husam H.
Study The Effect of Traditional Iraqi Stabilizers (Cement and Lime) on Some Properties of Iraqi Clay Soils [Volume 36, 3A, 2018, Page 248-255]
Barbooti, Mahmood M.
Preparation, Characterization and Utilization of Polyacrylamid-Kaolin Composite in the Removal of Nickel Ions From Water [Volume 36, 1C, 2018, Page 86-93]
C
Croock, Muayad S.
Sensor Network Based Animals Feeding and Milk Production Management System [Volume 36, 2A, 2018, Page 213-222]
D
Dabish, Asaad A.
Using RSM Technique for Modeling and Optimization the Influence of Cutting Parameters on Tool Wear and Cutting Forces in Turning Operation [Volume 36, 3A, 2018, Page 243-247]
Daoud, Samer F.
Workability of Hybrid Fiber Reinforced Self-Compacting Concrete [Volume 36, 2A, 2018, Page 111-116]
Dawood, Lamyaa M.
Analysis of Production System Effectiveness Elements [Volume 36, 8A, 2018, Page 832-841]
Dawud, Hadeel H.
Evaluation of purified urease activity from Proteus mirabilis using iron oxide nanoparticles and measurement of urea concentration in blood [Volume 36, 2B, 2018, Page 152-155]
Dhaher, Anmar S.
Workability of Hybrid Fiber Reinforced Self-Compacting Concrete [Volume 36, 2A, 2018, Page 111-116]
Dhayef, Dhulfiqar H.
Developing a Branch and Bound Algorithm for Cell Formation and Group Scheduling [Volume 36, 5A, 2018, Page 555-563]
E
Eessa, Hamsa A.
Levels of Lead and Chromium Ions in Different Brands of Lipstick Sold at Local Markets in Iraq [Volume 36, 2B, 2018, Page 147-151]
Essa, Kheria M.
Design a Gray Water Treatment System for a Virtual Building Working by Solar Energy [Volume 36, 1C, 2018, Page 79-85]
Ezzaldean, Mohammed Moanes
Design of Speed-Controller for Brushless DC-Motor Based on Grey Predictor-PID Controller [Volume 36, 8A, 2018, Page 900-905]
Ezzulddin, A.S.
Design and Simulation of Six-Band Triplexer Filter for WLAN Systems [Volume 36, 1A, 2018, Page 10-16]
F
Faayadh, Sameer K.
Effect of Laser Surface Melting on Chromium Carbide of 304 Stainless Steels [Volume 36, 3A, 2018, Page 344-349]
Fadhil, Hwazen S.
Study Compression and Impact Properties of PMMA Reinforced by Natural Fibers Used in Denture [Volume 36, 6A, 2018, Page 652-655]
Fadhil, Muthna J.
High Rate Data Processing System of 6x6 MIMO_OFDM Using FPGA Technique with Spatial Algorithm [Volume 36, 7A, 2018, Page 723-732]
Faiq, Lamees S.
Study of the Mechanical Properties of Jute Fiber Reinforced Cement Composites [Volume 36, 12A, 2018, Page 1244-1248]
Faris, Zena M.
Sensor Network Based Animals Feeding and Milk Production Management System [Volume 36, 2A, 2018, Page 213-222]
G
Ghazi, Inmar N.
Effects of Enhancement P+ Layer on IGBT Operation [Volume 36, 5A, 2018, Page 582-585]
Ghazy, Nagham G.
Effect of Current and Duty Factor for Different Electrode Shapes on Material Removal Rate in EDM [Volume 36, 6A, 2018, Page 633-640]
Gorial, Ivan I.
Sliding Mode Controller Design for Flexible Joint Robot [Volume 36, 7A, 2018, Page 733-741]
H
H., Batool Kadhim
Characterization of AA 6061–Alloy Composites Reinforced by Al2O3 Nano Particles Obtained by Stir Casting [Volume 36, 7A, 2018, Page 792-797]
Habeeb, Ayad J.
Shear Strength of Concrete Deep Beam Subjected to Uniformly Distributed Load [Volume 36, 2A, 2018, Page 125-135]
Hadi, Mohammed A.
Influence of Spirals on the Behavior of Short RC Columns Strengthened by External CFRP [Volume 36, 2A, 2018, Page 223-233]
Hadi, Noor
Experimental Behavior of Hybrid Steel and Polypropylene Fiber Reinforced Concrete Deep Beam Containing Openings [Volume 36, 2A, 2018, Page 163-171]
Hady, Haider N.
Applying Fuzzy Multi-Criteria DecisionMaking and Different Techniques to Solve Multi Objective Project Planning [Volume 36, 5A, 2018, Page 533-545]
Haider, Adawiay J.
Preparation and Characterization of TiO2 Nanoparticles and its Applications as Antibacterial Agents [Volume 36, 10A, 2018, Page 1068-1074]
Haider, Adawiya J.
Synthesis of Multi-Walled Carbon Nanotubes Decorated with Zinc Oxide Nanoparticles for Removal of Pathogenic Bacterial [Volume 36, 10A, 2018, Page 1075-1080]
Haleem, Azhar M.
Green Synthesis, Characterization and Antimicrobial Activity of Titanium Dioxide Nanoparticles Using Laser Ablation Technique [Volume 36, 1C, 2018, Page 11-16]
Hamad, Qahtan A.
Study the Effect of Nano-Al2O3 and Fiber Glass on Mechanical and Physical Properties of PMMA Composites for Prosthetic Denture [Volume 36, 7A, 2018, Page 715-722]
Hameed, Asraa K.
Multiple Performance Optimization of Carburized Steel Using Taguchi Based Moora Approach [Volume 36, 7A, 2018, Page 770-776]
Hameed, Awham M.
Using Polyethylene Glycol to Produce Self Cured Cement Mortar [Volume 36, 4A, 2018, Page 401-409]
Hammas, Hussain A.
Design of Compact Multiband Microstrip BPF Based on Fractal Open-Ring Configuration [Volume 36, 8A, 2018, Page 887-890]
Hamood, Mohammed J.
Effect of CFRP Layer Orientation on the Behavior of Shear-Strengthened Steel Plate Girders [Volume 36, 7A, 2018, Page 709-714]
Hamza, Nawres D.
Optical and Structural Properties of (In2O3:ZnO:Au) Nanocomposite Thin Films Prepared by Spray Pyrolysis Method [Volume 36, 1B, 2018, Page 53-58]
Hamza, Noor H.
Removal of Cr (VI) and Cu (II) Ions from Synthetic Wastewater by Solar Photocatalytic Reactor [Volume 36, 4A, 2018, Page 417-423]
Hanoon, Mahdi M.
The Effect of Addition of CeO2 Nanoparticles on the Microstructure and Mechanical Properties of Ti-Al-Mg Compact Samples [Volume 36, 11A, 2018, Page 1189-1195]
Hanoos, Mervit M.
Corrosion Activity Laser Treated Aluminum-12% Silicon Alloy with Fe and Ti Powders at Two Different Energies [Volume 36, 11A, 2018, Page 1196-1200]
Hanoos, Mervit M.
Effect of Inhibition by Honey on Corrosion Behavior of Composite Materials from Al-4% Si Alloy Reinforced with Y2O3 Particles [Volume 36, 11A, 2018, Page 1208-1212]
Hasan, A. A.
Measurement of Radon Gas Concentrations and Hazard Effects in Underground Water Samples in Karbala Governorate of Iraq [Volume 36, 2C, 2018, Page 118-122]
Hasan, Ali Kh.
Experimental Behavior of Self Compacting Concrete Corbels Strengthened with External CFRP [Volume 36, 2A, 2018, Page 154-162]
Hasan, Hamid M.
A Comparative Analysis for Congestion Mechanism in COAP and COCOA [Volume 36, 8A, 2018, Page 867-877]
Hasan, Ibtisam A.
Performance Evaluation of the V–basin Tube Solar Collector by Using .Different Nanoparticles and Base Fluids [Volume 36, 4A, 2018, Page 461-470]
Hasan, Ibtisam A.
Enhancement the Performance of PV Panel by Using Fins as Heat Sink [Volume 36, 7A, 2018, Page 798-805]
Hasan, Raghad H.
Optimum Site Selection for Groundwater wells using Integration between GIS and Hydrogeophysical Data [Volume 36, 6A, 2018, Page 596-602]
Hasan, Wisam N.
Optimization of Heat Treatment Parameters for the Tensile Properties of Medium Carbon Steel [Volume 36, 10A, 2018, Page 1091-1099]
Hashim, Fadhal A.
Effect of Nano BN Addition on the Properties of an Aluminum Metal Matrix Composite [Volume 36, 6A, 2018, Page 691-695]
Hashim, Ivan A.
Design and Implementation of a Two Stage Controller for Ball and Beam System Using FPGA [Volume 36, 4A, 2018, Page 381-390]
Hashim, Walaa M.
Energy Saving in Power Consumption by Using Double Glazing Windows in Iraq [Volume 36, 9A, 2018, Page 1002-1007]
Hashim, Walaa M.
Investigation Vibration Damping in the Hydraulic Systems by Using an Accumulator [Volume 36, 12A, 2018, Page 1267-1282]
Hassan, Ahmed T.
Developing an Approach to Redesign Freeform Surfaces Using B-Spline Technique [Volume 36, 12A, 2018, Page 1213-1221]
Hassan, Ali Y.
Experimental Study of Mechanical Properties of Type Linear Low Density Polyethylene and Mold Design [Volume 36, 5A, 2018, Page 493-499]
Hassan, Maan S.
The Use of Photocatalytic Cementitious Coatings to Reduce Nitric Oxide from Ambient Air [Volume 36, 1C, 2018, Page 17-21]
Hassan, Mosab A.
Design and Analysis of American Sign Language Classifier Based on n-tuple Technique [Volume 36, 2A, 2018, Page 172-178]
Hassan, Nidaa F.
Proposed Video Watermarking Algorithm based on Edge or Corner Regions [Volume 36, 1B, 2018, Page 25-32]
Hassan, Nidaa F.
Propose an Arabic CAPTCHA System based on Chaotic Maps [Volume 36, 1B, 2018, Page 48-52]
Hassan, Sara M.
Potential of Alfalfa for Use in Phytoremediation of Soil Polluted with Total Petroleum Hydrocarbons [Volume 36, 1C, 2018, Page 1-4]
Hassan, Shaker S.
Using RSM Technique for Modeling and Optimization the Influence of Cutting Parameters on Tool Wear and Cutting Forces in Turning Operation [Volume 36, 3A, 2018, Page 243-247]
Hatem, Falah
Enhancement of Thermal Storage Properties of Phase Change Material by Using Metallic Swarf [Volume 36, 5A, 2018, Page 586-595]
Hatem, Haraa R.
Hiding 9 Gray Images In RGB Image and Using Filters For Noise Removing [Volume 36, 11A, 2018, Page 1144-1147]
Helan, D.S.
Effect of Polymer Additives on Permeability of Asphalt Concrete Mixtures [Volume 36, 1A, 2018, Page 75-83]
Hilal, M.M.
Effect of Polymer Additives on Permeability of Asphalt Concrete Mixtures [Volume 36, 1A, 2018, Page 75-83]
Hilal, Raghad H.
Preparation, Characterization and Utilization of Polyacrylamid-Kaolin Composite in the Removal of Nickel Ions From Water [Volume 36, 1C, 2018, Page 86-93]
Hoshi, Hisham A.
Energy Saving in Power Consumption by Using Double Glazing Windows in Iraq [Volume 36, 9A, 2018, Page 1002-1007]
Hoshi, Hisham A.
Investigation Vibration Damping in the Hydraulic Systems by Using an Accumulator [Volume 36, 12A, 2018, Page 1267-1282]
Hubeatir, Kadhim A.
Modeling of Continues Laser Welding for Ti-6Al-4V Alloys Using COMSOL Multiphysics Software [Volume 36, 8A, 2018, Page 914-918]
Husain, Sajeda A.
Transesterification of Castor Oil by Using Methanol and Ethanol (50/50) Mixture [Volume 36, 1B, 2018, Page 59-63]
Hussan, Mohammed R.
Design of Compact Multiband Microstrip BPF Based on Fractal Open-Ring Configuration [Volume 36, 8A, 2018, Page 887-890]
Hussein, Abbas K.
Multiple Performance Optimization of Carburized Steel Using Taguchi Based Moora Approach [Volume 36, 7A, 2018, Page 770-776]
Hussein, Abbas Kh.
Optimization of Heat Treatment Parameters for the Tensile Properties of Medium Carbon Steel [Volume 36, 10A, 2018, Page 1091-1099]
Hussein, Nassr F.
Mechanical and Acoustic Properties of Composite Material in a Secondary Roof to Reducing the Cooling Load [Volume 36, 9A, 2018, Page 972-978]
Hussein, Nassr F.
Effect of V-Shape Twisted Jaw Turbulators on Thermal Performance of Tube heat exchanger: An Experimental Study [Volume 36, 11A, 2018, Page 1158-1164]
Hussian, ayat
The Use of Photocatalytic Cementitious Coatings to Reduce Nitric Oxide from Ambient Air [Volume 36, 1C, 2018, Page 17-21]
I
Ibrahem, Sherko A.
Maximizing the Value of Decay Rate for a Vibrated Beam [Volume 36, 10A, 2018, Page 1100-1109]
Ibrahim, Ali A.
C-Reactive Protein as a Marker in the Iraq Patients with Poisoning Thyroid Gland Disease [Volume 36, 1B, 2018, Page 44-47]
Ibrahim Ali, Inaam I.
Optimal Reconfiguration and Distributed Generation placement in Baghdad Distribution Sector [Volume 36, 3A, 2018, Page 333-343]
Idan, Deana A.
Microstructure and Electrical Conductivity of 7075Al alloy/SiC Nano Composites [Volume 36, 10A, 2018, Page 1034-1038]
I. Salih, Sihama
Study Compression and Impact Properties of PMMA Reinforced by Natural Fibers Used in Denture [Volume 36, 6A, 2018, Page 652-655]
I. Salih, Sihama
Preparation and Investigation of Flexural Strength and Impact Strength for Nano Hybrid Composite Materials of the Tri- Polymeric Blend used in Structural Applications [Volume 36, 1B, 2018, Page 12-24]
J
Jaafar, Abdullah
The Influence of Punch Profile Radius on Deep Drawing Process in Case of a Low Carbon Steel Cylindrical Cup [Volume 36, 10A, 2018, Page 1048-1058]
Jaber, Adil SH.
Metal Flow Control in Producing the Non Symmetrical Parts in Deep Drawing Process [Volume 36, 6A, 2018, Page 603-611]
Jaber, Adil. Sh.
Investigation of The Effect of Loading Paths in the Tube Hydroforming Process [Volume 36, 12A, 2018, Page 1236-1243]
Jaber, Adil. Sh.
Experimental and Numerical Study of the Earing Defect During Square Deep Drawing Process [Volume 36, 12A, 2018, Page 1267-1275]
Jaber, Hussein
Investigation of Addition Different Fibers on the Performance of Cement Mortar [Volume 36, 9A, 2018, Page 957-965]
Jafar, Sami I.
Effect of Laser Surface Melting on Chromium Carbide of 304 Stainless Steels [Volume 36, 3A, 2018, Page 344-349]
Jalal, Ali S.
On the Performance of a Microstrip Antenna Based UC-PBG Structures for UHF RFID Readers [Volume 36, 5A, 2018, Page 480-487]
Jalal, Kanaan A.
Fault Diagnosis in Wind Power System Based on Intelligent Techniques [Volume 36, 11A, 2018, Page 1201-1207]
Jalil, Jalal M.
Numerical and Experimental Study of Cooling in Desktop Computer with Block Heat Sink [Volume 36, 4A, 2018, Page 430-438]
Jalil, Jalal M.
Performance Study of Solar Air Heater with Thermally Conducted Multi V Shaped Baffles and Ribs [Volume 36, 8A, 2018, Page 930-938]
Jasem, Manal H.
Studying of Buckling Behavior on Composite Material [Volume 36, 3A, 2018, Page 322-327]
Jasim, Manal H.
Tuning of a PID Controller by Bacterial Foraging Algorithm for Position Control of DC Servo Motor [Volume 36, 3A, 2018, Page 287-294]
Jasim, Mohammed S.
Earth Fault Protection Failure in the Distribution Transformer 11/0.4 kV Supply [Volume 36, 4A, 2018, Page 391-400]
Jasim, Nibras S.
Effect of Nano BN Addition on the Properties of an Aluminum Metal Matrix Composite [Volume 36, 6A, 2018, Page 691-695]
Jasim, Suhad H.
Analytical Comparison on Inductive Wireless Power Transfer System for Biomedical Devices [Volume 36, 6A, 2018, Page 612-619]
Jassim, Ahmed L.
A Simplified Recurrent Neural Network Trained by Gbest-Guided Gravitational Search Algorithm to Control Nonlinear Systems [Volume 36, 12A, 2018, Page 1290-1301]
Jassim, Lina
Potential of Ethylhexyl Ester Oil to Enhance Drilling of HTHP Wellbores [Volume 36, 1C, 2018, Page 30-37]
Jassim, Marwa F.
A Proposed Method for the Sound Recognition Process [Volume 36, 8A, 2018, Page 939-945]
Jassim, Zahraa M.
Transesterification of Castor Oil by Using Methanol and Ethanol (50/50) Mixture [Volume 36, 1B, 2018, Page 59-63]
Jawad, Muslim F.
Studying the Effect of Annealing Temperature on some Physical Properties of In2O3 Thin Films [Volume 36, 2B, 2018, Page 124-127]
Jawad, Waleed K.
The Influence of Punch Profile Radius on Deep Drawing Process in Case of a Low Carbon Steel Cylindrical Cup [Volume 36, 10A, 2018, Page 1048-1058]
Jawad, Zahraa F.
Study The Effect of Micro CaCO3 and SiO2 and their Mixture on Properties of High Strength Concrete [Volume 36, 10A, 2018, Page 1027-1033]
Jeiad, H.A.
Indian Number Handwriting Features Extraction and Classification using Multi-Class SVM [Volume 36, 1A, 2018, Page 33-40]
Jeiad, Hassan A.
Employee Performance Assessment Using Modified Decision Tree [Volume 36, 7A, 2018, Page 806-811]
Jony, H.H.
Effect of Polymer Additives on Permeability of Asphalt Concrete Mixtures [Volume 36, 1A, 2018, Page 75-83]
Judran, Abdul Hadi K.
Optical and Structural Properties of (In2O3:ZnO:Au) Nanocomposite Thin Films Prepared by Spray Pyrolysis Method [Volume 36, 1B, 2018, Page 53-58]
Judran, Abdul Hadi K.
Analytical Characterization and Antimicrobial Activity of Bismuth Nanoparticles Synthesized Using Laser Ablation Technique [Volume 36, 1C, 2018, Page 71-81]
Jumaa, Nada H.
Effect of Impact Hot- Dry Weather Conditions on the Properties of High Performance Lightweight Concrete [Volume 36, 3A, 2018, Page 262-273]
Jumaah, Ajheen H.
Studying the Efficiency of Lime-Soda Sinter Process to Extract Alumina from Colored Kaolinite Ores Using Factorial Technique of Design of Experiments [Volume 36, 5A, 2018, Page 500-508]
Jwair, Marwa H.
On the Performance of a Microstrip Antenna Based UC-PBG Structures for UHF RFID Readers [Volume 36, 5A, 2018, Page 480-487]
K
Kadhim, Abdulhadi
Green Synthesis, Characterization and Antimicrobial Activity of Titanium Dioxide Nanoparticles Using Laser Ablation Technique [Volume 36, 1C, 2018, Page 11-16]
Kadhim, Hussein A.
Studies on Characterization of Sawdust for Application in a Gasification Process for Syngas Production [Volume 36, 10A, 2018, Page 1022-1026]
Kadhim, Mizher A.
A Mathematical Model to Determination of Alum Amount Added for the Purpose of Coagulation in Water Purification Plants [Volume 36, 4A, 2018, Page 456-460]
Kadhim, Mohammad J.
Effect of Laser Surface Melting on Chromium Carbide of 304 Stainless Steels [Volume 36, 3A, 2018, Page 344-349]
Kadhom, Hatam K.
Mechanical and Acoustic Properties of Composite Material in a Secondary Roof to Reducing the Cooling Load [Volume 36, 9A, 2018, Page 972-978]
Kadhum, T.A.
Accuracy Assessment of World View-2 Satellite Imagery for Planimetric Maps Production [Volume 36, 1A, 2018, Page 1-9]
Kadim, Mohamed A.
Size Miniaturized Fractal Nested Circular Rings-Shaped Microstrip Antenna for Various Wireless Applications [Volume 36, 11A, 2018, Page 1176-1184]
Kahdim, Ghadah R.
Preparation and Characterization of TiO2 Nanoparticles and its Applications as Antibacterial Agents [Volume 36, 10A, 2018, Page 1068-1074]
Kalash, Khairi
Biosorption Technique for Naphthalene Removal from Aqueous Solution By Chara sp., Algae [Volume 36, 9A, 2018, Page 1008-1015]
Kamal, Hamza M.
Investigate the Effect of Different Kinds of Discontinuous Fibers on the Mechanical Properties of Epoxy Matrix Composite Materials [Volume 36, 5A, 2018, Page 520-522]
Kamel, Maryam D.
C-Reactive Protein as a Marker in the Iraq Patients with Poisoning Thyroid Gland Disease [Volume 36, 1B, 2018, Page 44-47]
Karam, Ekhlas H.
Design and Implementation of a Two Stage Controller for Ball and Beam System Using FPGA [Volume 36, 4A, 2018, Page 381-390]
Kareem, Azad R.
New Strategies for Associative Memories [Volume 36, 2A, 2018, Page 207-212]
Kareem, Azad R.
A Proposed Method for the Sound Recognition Process [Volume 36, 8A, 2018, Page 939-945]
Kashan, Jenan S.
Mechanical Properties Modeling and Optimization for Polymeric Matrix Hybrid Bio Composite for Scaffolds Application [Volume 36, 12A, 2018, Page 1226-1235]
Kashan, J.S.
Bio and Mechanical Evaluation of an Enhanced Bio Glass [Volume 36, 1A, 2018, Page 65-69]
Khalaf, A.Z.
Accuracy Assessment of World View-2 Satellite Imagery for Planimetric Maps Production [Volume 36, 1A, 2018, Page 1-9]
Khalaf, Majid S.
Effect of Laser Pulses on Characterization of Zincoxide Thin Film Prepared by PLD [Volume 36, 1B, 2018, Page 93-98]
Khalaf, Mohammed K.
The Growth Characteristics of RF-Magnetron Sputtered Nanocrystalline TiO2 Thin Films [Volume 36, 2B, 2018, Page 128-130]
Khalaf, Mohammed K.
The Effects of Sputtering Time on Cds Thin Film Solar Cell Deposited by DC Plasma Sputtering Method [Volume 36, 2C, 2018, Page 123-127]
Khaleel, S.K.
Design and Simulation of Six-Band Triplexer Filter for WLAN Systems [Volume 36, 1A, 2018, Page 10-16]
Khalefa, Muhannad Z.
Experimental Design Electromechanical Machine to Produce Electricity by Vertical Dynamic Load [Volume 36, 8A, 2018, Page 878-886]
Khalel, Raid I.
Influence of Spirals on the Behavior of Short RC Columns Strengthened by External CFRP [Volume 36, 2A, 2018, Page 223-233]
Khalil, Wasan I.
Effect of Impact Hot- Dry Weather Conditions on the Properties of High Performance Lightweight Concrete [Volume 36, 3A, 2018, Page 262-273]
Khasraghi, Abeer H.
Levels of Lead and Chromium Ions in Different Brands of Lipstick Sold at Local Markets in Iraq [Volume 36, 2B, 2018, Page 147-151]
Khayyun, Thair S.
Stability Analysis of an Earth Dam Using GEO-SLOPE Model under Different Soil Conditions [Volume 36, 5A, 2018, Page 523-532]
Khazaal, Shaymaa H.
Levels of Lead and Chromium Ions in Different Brands of Lipstick Sold at Local Markets in Iraq [Volume 36, 2B, 2018, Page 147-151]
Khudhair, Abdulkareem
Enhancement of Thermal Storage Properties of Phase Change Material by Using Metallic Swarf [Volume 36, 5A, 2018, Page 586-595]
Khudhair, Muna M.
Transesterification of Castor Oil by Using Methanol and Ethanol (50/50) Mixture [Volume 36, 1B, 2018, Page 59-63]
Kiter, Riyah N.
Proposed Design Against High-Cycle Fatigue Failure of Metallic Beams Using Lamination [Volume 36, 5A, 2018, Page 574-581]
Kudryavtsev, Sregey
Experimental Investigation of a New Modified Catalysts (WO3/Si-Zr) and (Si-Zr) for the Process of Aerosol Nanocatalysts by FCC of Residual Vacuum Distillation [Volume 36, 3A, 2018, Page 274-281]
Kurdi, Hiba H.
Numerical and Experimental Study of Cooling in Desktop Computer with Block Heat Sink [Volume 36, 4A, 2018, Page 430-438]
L
Lutfy, Omar F.
Intelligent Modeling of Metal Oxide Gas Sensor [Volume 36, 7A, 2018, Page 777-783]
Lutfy, Omar F.
Internal Model Control Using a Self-Recurrent Wavelet Neural Network Trained by an Artificial Immune Technique for Nonlinear Systems [Volume 36, 7A, 2018, Page 784-791]
Lutfy, Omar F.
A Simplified Recurrent Neural Network Trained by Gbest-Guided Gravitational Search Algorithm to Control Nonlinear Systems [Volume 36, 12A, 2018, Page 1290-1301]
M
Madh, Yosif A.
Performance Study of Solar Air Heater with Thermally Conducted Multi V Shaped Baffles and Ribs [Volume 36, 8A, 2018, Page 930-938]
Mahdi, Ayat
Seasonal Variation of Residual Aluminum Concentration in Drinking Water [Volume 36, 1C, 2018, Page 63-70]
Mahdi, Hashim A.
Experimental Investigation of a New Modified Catalysts (WO3/Si-Zr) and (Si-Zr) for the Process of Aerosol Nanocatalysts by FCC of Residual Vacuum Distillation [Volume 36, 3A, 2018, Page 274-281]
Mahdi, Hashim A.
Design a Gray Water Treatment System for a Virtual Building Working by Solar Energy [Volume 36, 1C, 2018, Page 79-85]
Mahdi, Janan A.
ECG Analysis Using DWT and Wavelet Coefficient to Reduce the Feature and SVM-ICP for Classification and Matching [Volume 36, 8A, 2018, Page 925-929]
Mahdi, Khalid
Determination of Radon Concentrations in Soil Around Al-Tuwaitha Site Using CR-39 Detector [Volume 36, 2C, 2018, Page 108-112]
Mahdi, Louay A.
Entropy Generation Minimization Theoretical Analysis for External Flow Around Horizontal Cylinder at low Reynold Number [Volume 36, 2A, 2018, Page 202-206]
Mahdi, Rawnaq S.
Ecological Risk Assessment of Chromium Pollution in the Soil of Industrial Area within Baghdad City [Volume 36, 1C, 2018, Page 49-53]
Mahmmed, Mahmuod H.
Robust Visual Lips Feature Extraction Method for Improved Visual Speech Recognition System [Volume 36, 2A, 2018, Page 136-145]
Mahmood, Alza A.
Employee Performance Assessment Using Modified Decision Tree [Volume 36, 7A, 2018, Page 806-811]
Mahmood, Ekhlas J.
Theoretical Study of comparative between the speed of penetration and cutting using a laser beam [Volume 36, 1B, 2018, Page 37-43]
Mahmood, Hussein A.
DCF with FBG for Dispersion Compensation in Optical Fiber Link at Various Bit Rates using Duobinary Modulation Format [Volume 36, 5A, 2018, Page 514-519]
Mahmood, Luma H.
Removal of Cr (VI) and Cu (II) Ions from Synthetic Wastewater by Solar Photocatalytic Reactor [Volume 36, 4A, 2018, Page 417-423]
Mahmood, Omar T.
Speed Reference Tracking for Separately Excited DC Motor Based ANFIS and Hysteresis Current Control Techniques [Volume 36, 6A, 2018, Page 680-690]
Mahmood, Salih H.
The Relationship between Data Transfer Rate and Distance in Power Networks Modems [Volume 36, 6A, 2018, Page 620-627]
Mahmood, Sarab T.
Easy and New Chemical Synthesis of Stable Nano Sliver using Propylene Glycol and Glycerin as Reducing Agents [Volume 36, 2B, 2018, Page 131-135]
Mahmoud, Mahmoud A.
Applying Fuzzy Multi-Criteria DecisionMaking and Different Techniques to Solve Multi Objective Project Planning [Volume 36, 5A, 2018, Page 533-545]
Mahmoud, Zainab SH.
Robust Multiple Model Adaptive Control for Dynamic Positioning of Quadrotor Helicopter System [Volume 36, 12A, 2018, Page 1249-1259]
Majeed, Laith Khames
Formation Control of Mobile Robots Using Sliding Mode Control Based on Conditional Servocompensator [Volume 36, 12A, 2018, Page 1302-1310]
Majeed, Rand A.
Internal Model Control Using a Self-Recurrent Wavelet Neural Network Trained by an Artificial Immune Technique for Nonlinear Systems [Volume 36, 7A, 2018, Page 784-791]
Majid, Sinan
Select the Best Cyclic Prefix for Various Effective Area in an O-OFDM System [Volume 36, 5A, 2018, Page 488-492]
Mankhi, Hussein J.
Text File Hiding Randomly Using Secret Sharing Scheme [Volume 36, 1B, 2018, Page 1-6]
Mhmood, Ibtihal A.
Experimental Study for the Effects of Crystalline Agents on Properties of Glass-Ceramic Coating [Volume 36, 2A, 2018, Page 179-184]
Mishal, Usama R.
Stability Analysis of an Earth Dam Using GEO-SLOPE Model under Different Soil Conditions [Volume 36, 5A, 2018, Page 523-532]
Mohamed, M.J.
Design a Fuzzy PID Controller for Trajectory Tracking of Mobile Robot [Volume 36, 1A, 2018, Page 100-110]
Mohamed, Sukaine J.
Removal of Cr (VI) and Cu (II) Ions from Synthetic Wastewater by Solar Photocatalytic Reactor [Volume 36, 4A, 2018, Page 417-423]
Mohammed, Abbas A.
C-Reactive Protein as a Marker in the Iraq Patients with Poisoning Thyroid Gland Disease [Volume 36, 1B, 2018, Page 44-47]
Mohammed, Abdulah A.
Easy and New Chemical Synthesis of Stable Nano Sliver using Propylene Glycol and Glycerin as Reducing Agents [Volume 36, 2B, 2018, Page 131-135]
Mohammed, Ammar S.
Analysis and Simulation of Unmanned Aircraft Propeller Motor Using PSIM [Volume 36, 10A, 2018, Page 1081-1090]
Mohammed, Aseel J.
Mechanical and Acoustic Properties of Composite Material in a Secondary Roof to Reducing the Cooling Load [Volume 36, 9A, 2018, Page 972-978]
Mohammed, Asma H.
Effect of Laser Pulses on Characterization of Zincoxide Thin Film Prepared by PLD [Volume 36, 1B, 2018, Page 93-98]
Mohammed, A.Z.
Study the Dye Decolorization of Wastewater Using Bentonite, H2O2, Ultrasonic and Laser Techniques [Volume 36, 1A, 2018, Page 41-45]
Mohammed, Duaa A.
Studying the Effect of Annealing Temperature on some Physical Properties of In2O3 Thin Films [Volume 36, 2B, 2018, Page 124-127]
Mohammed, Hayder A.
Synthesis of Multi-Walled Carbon Nanotubes Decorated with Zinc Oxide Nanoparticles for Removal of Pathogenic Bacterial [Volume 36, 10A, 2018, Page 1075-1080]
Mohammed, Mohammed T.
Investigate WEDM Process Parameters on Wire Wear Ratio, Material Removal Rate and Surface Roughness of Steel 1012 AISI [Volume 36, 3A, 2018, Page 256-261]
Mohammed, Mohammed J.
A Comparison Study of Underwater and Land Flexible Manipulators [Volume 36, 6A, 2018, Page 664-671]
Mohammed, Mohammed H.
Design a Gray Water Treatment System for a Virtual Building Working by Solar Energy [Volume 36, 1C, 2018, Page 79-85]
Mohammed, Mustafa S.
Preparation and Investigation of Flexural Strength and Impact Strength for Nano Hybrid Composite Materials of the Tri- Polymeric Blend used in Structural Applications [Volume 36, 1B, 2018, Page 12-24]
Mohammed, Raeid K.
Investigation the Effect of Nano–Particles and Recycling Mortar Additives on Physical and Mechanical Properties of Concrete [Volume 36, 3A, 2018, Page 295-303]
Mohammed, Reem
Study of some Mechanical Properties and Erosive Behavior by Taguchi Method for Hybrid Nano Composites [Volume 36, 4A, 2018, Page 471-479]
Mohammed, Reem A.
Some Mechanical Properties of Polymer Matrix Composites Reinforced by Nano Silica Particles and Glass Fibers [Volume 36, 12A, 2018, Page 1283-1289]
Mohammed, Sarah J.
A Proposed Alzheimer's Disease Diagnosing System Based on Clustering and Segmentation Techniques [Volume 36, 2B, 2018, Page 160-165]
Mohammed, Suaad A.
The Growth Characteristics of RF-Magnetron Sputtered Nanocrystalline TiO2 Thin Films [Volume 36, 2B, 2018, Page 128-130]
Mohammed, Zaynab S.
Strength Evaluation of Hybrid Reinforced Concrete Columns under Eccentric Loads [Volume 36, 4A, 2018, Page 449-455]
Mohammed Ridha, Dher
Enhancement of Thermal Storage Properties of Phase Change Material by Using Metallic Swarf [Volume 36, 5A, 2018, Page 586-595]
Mohmmed, Jabbar H.
Experimental Study for the Effects of Crystalline Agents on Properties of Glass-Ceramic Coating [Volume 36, 2A, 2018, Page 179-184]
Mohsein, Zainab H.
Study the Characteristics Thermal and Mechanical for Unsaturated Polyester Resin Forced by Asbestos Fiber [Volume 36, 3A, 2018, Page 282-286]
Mosleh, Mahmood F.
Size Miniaturized Fractal Nested Circular Rings-Shaped Microstrip Antenna for Various Wireless Applications [Volume 36, 11A, 2018, Page 1176-1184]
Mosleh, Mohmmod
Design and Implementation of WLAN Based ZigBee for Personal Identification [Volume 36, 8A, 2018, Page 919-924]
Muhammad, Ahmed
Investigate the Effect of Different Kinds of Discontinuous Fibers on the Mechanical Properties of Epoxy Matrix Composite Materials [Volume 36, 5A, 2018, Page 520-522]
Muhammad, Muhammad A.
Effect of High Temperature on Mechanical Properties of Rubberized Concrete Using Recycled Tire Rubber as Fine Aggregate Replacement [Volume 36, 8A, 2018, Page 906-913]
Mutashar, Saad
Suggested Methods to Solve the Coils Misalignment for the Biomedical Implants [Volume 36, 6A, 2018, Page 628-632]
N
Naji, Noor I.
Effects of Electrode Geometry on Energy Transfer Characteristics of Electrolytic Cells Used for Production of Metallic Nanostructures [Volume 36, 1B, 2018, Page 33-36]
Najm, V.N.
Experimental Investigation of Wire EDM Process Parameters on Heat Affected Zone [Volume 36, 1A, 2018, Page 46-54]
Najm, V.N.
Surface Roughness Evaluation in WEDM Using Taguchi Parameter Design Method [Volume 36, 1A, 2018, Page 60-64]
Nassir, Wail Y.
Effects of Enhancement P+ Layer on IGBT Operation [Volume 36, 5A, 2018, Page 582-585]
Neamah, Hashim S.
Studying of Heat Treatment Influence on Mechanical Behavior of AA6061-T6 by Desirability Function Analysis Approach [Volume 36, 4A, 2018, Page 368-372]
Noori, Farah T.M.
Optical and Structural Properties of (In2O3:ZnO:Au) Nanocomposite Thin Films Prepared by Spray Pyrolysis Method [Volume 36, 1B, 2018, Page 53-58]
O
Obayes, Hasan R.
Levels of Lead and Chromium Ions in Different Brands of Lipstick Sold at Local Markets in Iraq [Volume 36, 2B, 2018, Page 147-151]
Oleiwi, Jawad K.
Study Compression and Impact Properties of PMMA Reinforced by Natural Fibers Used in Denture [Volume 36, 6A, 2018, Page 652-655]
Oleiwi, Jawad K.
Some Mechanical Properties of Polymer Matrix Composites Reinforced by Nano Silica Particles and Glass Fibers [Volume 36, 12A, 2018, Page 1283-1289]
Omran, Hassan A.
A Mathematical Model to Determination of Alum Amount Added for the Purpose of Coagulation in Water Purification Plants [Volume 36, 4A, 2018, Page 456-460]
Othman, Farhad M.
Investigation the Effect of Nano–Particles and Recycling Mortar Additives on Physical and Mechanical Properties of Concrete [Volume 36, 3A, 2018, Page 295-303]
Othman, Tahseen T.
Maximizing the Value of Decay Rate for a Vibrated Beam [Volume 36, 10A, 2018, Page 1100-1109]
Owaid, Abdul J.
Characterization of AA 6061–Alloy Composites Reinforced by Al2O3 Nano Particles Obtained by Stir Casting [Volume 36, 7A, 2018, Page 792-797]
R
Raafat, Safanah M.
Robust Multiple Model Adaptive Control for Dynamic Positioning of Quadrotor Helicopter System [Volume 36, 12A, 2018, Page 1249-1259]
Radhi, Ali A.
Multiple Access Chua Chaotic Communication system using Real Orthogonal Matrix Approach [Volume 36, 7A, 2018, Page 759-769]
Rahil, Falah H.
Development Bearing Capacity of Piles Embedded in Clayey Soil [Volume 36, 3A, 2018, Page 315-321]
Rahil, Falah H.
Comparison of the Behavior for Free Standing Pile Group and Piles of Piled Raft [Volume 36, 4A, 2018, Page 373-380]
Rawdhan, Rasha
Using Polyethylene Glycol to Produce Self Cured Cement Mortar [Volume 36, 4A, 2018, Page 401-409]
Redha, H.A.M.
Study the Dye Decolorization of Wastewater Using Bentonite, H2O2, Ultrasonic and Laser Techniques [Volume 36, 1A, 2018, Page 41-45]
Resen, Ali M.
The Effect of Addition of CeO2 Nanoparticles on the Microstructure and Mechanical Properties of Ti-Al-Mg Compact Samples [Volume 36, 11A, 2018, Page 1189-1195]
Resheq, Ali S.
Shear Strength of Concrete Deep Beam Subjected to Uniformly Distributed Load [Volume 36, 2A, 2018, Page 125-135]
S
Sabeh, Sabah H.
The Effects of Sputtering Time on Cds Thin Film Solar Cell Deposited by DC Plasma Sputtering Method [Volume 36, 2C, 2018, Page 123-127]
Saber, Zahraa I.
Design and Implementation of WLAN Based ZigBee for Personal Identification [Volume 36, 8A, 2018, Page 919-924]
Sabri, Anaam A.
Removal of Cobalt (Co(II)) from Aqueous Solution by Amino Functionalized SBA-15 [Volume 36, 7A, 2018, Page 703-708]
Sadeiq, Anfal H.
Applying Modern Optimization Techniques for Prediction Reaction Kinetics of Iraqi Heavy Naphtha Hydrodesulferization [Volume 36, 11A, 2018, Page 1171-1175]
Sadkhan, Azhar K.
The Growth Characteristics of RF-Magnetron Sputtered Nanocrystalline TiO2 Thin Films [Volume 36, 2B, 2018, Page 128-130]
Sadkhan, Azhar K.
Optical Characterizations of RF-Magnetron Sputtered Nanocrystalline TiO2 Thin Film [Volume 36, 2B, 2018, Page 156-159]
Sadkhan, Azhar K.
The Effects of Sputtering Time on Cds Thin Film Solar Cell Deposited by DC Plasma Sputtering Method [Volume 36, 2C, 2018, Page 123-127]
Saeed, Azzad B.
Realization of Direct Linear Relation Between Control Voltage and Resonance Frequency of the LC Voltage Controlled Oscillator [Volume 36, 9A, 2018, Page 966-971]
Saeed, Azzad B.
New Accurate Wattmeter Based on Logarithmic Amplifiers [Volume 36, 11A, 2018, Page 1165-1170]
Saeed, Fouad
Effect of DEM and Land Cover Resolutions on Simulated Runoff of Adhaim Watershed by SWAT Model [Volume 36, 4A, 2018, Page 439-448]
Saeed, Ikram A.
Flexural Behavior of RC Beams Strengthened by NSM-CFRP Laminates or Bars [Volume 36, 4A, 2018, Page 358-367]
Saeed, Omar Y.
Optimal Reconfiguration and Distributed Generation placement in Baghdad Distribution Sector [Volume 36, 3A, 2018, Page 333-343]
Saeed, Thamir R.
Robust Visual Lips Feature Extraction Method for Improved Visual Speech Recognition System [Volume 36, 2A, 2018, Page 136-145]
Saeed, Thamir
Design and Analysis of American Sign Language Classifier Based on n-tuple Technique [Volume 36, 2A, 2018, Page 172-178]
Sahib, Mohanad A.
Analysis of Production System Effectiveness Elements [Volume 36, 8A, 2018, Page 832-841]
Sahib, Usama I.
Antioxidant activity of Linalool [Volume 36, 1B, 2018, Page 64-67]
Saleh, A.M.
Surface Roughness Evaluation in WEDM Using Taguchi Parameter Design Method [Volume 36, 1A, 2018, Page 60-64]
Saleh Al-Khafaji, Mahmoud
Effect of DEM and Land Cover Resolutions on Simulated Runoff of Adhaim Watershed by SWAT Model [Volume 36, 4A, 2018, Page 439-448]
Salih, Ghaydaa K.
Performance Study of Solar Air Heater with Thermally Conducted Multi V Shaped Baffles and Ribs [Volume 36, 8A, 2018, Page 930-938]
Salih, Rana M.
The Influence of Immersion in Different Chemical Solutions on the Mechanical and Physical properties of (Epoxy/Styrene-Butadiene Rubber) Blend Reinforced with Nano Copper Oxide [Volume 36, 2B, 2018, Page 104-109]
Salih, Shakir A.
Using Polyethylene Glycol to Produce Self Cured Cement Mortar [Volume 36, 4A, 2018, Page 401-409]
Salih, Shefaa M.
Transesterification of Castor Oil by Using Methanol and Ethanol (50/50) Mixture [Volume 36, 1B, 2018, Page 59-63]
Salih, Wleed B.
Preparation and Investigation of Flexural Strength and Impact Strength for Nano Hybrid Composite Materials of the Tri- Polymeric Blend used in Structural Applications [Volume 36, 1B, 2018, Page 12-24]
Salim, Ali J.
A Compact Dual-Band BPF Based on Open Loop Resonator for Satellite Communication Applications [Volume 36, 9A, 2018, Page 997-1001]
Salleh, Amar
Potential of Ethylhexyl Ester Oil to Enhance Drilling of HTHP Wellbores [Volume 36, 1C, 2018, Page 30-37]
Salman, G.A.
Density and Ultrasonic Pulse Velocity Investigation of Self-Compacting Carbon Fiber- Reinforced Concrete [Volume 36, 1A, 2018, Page 89-99]
Salman, Haneen A.
Modeling of Continues Laser Welding for Ti-6Al-4V Alloys Using COMSOL Multiphysics Software [Volume 36, 8A, 2018, Page 914-918]
Sarsam, Kaiss F.
Influence of Spirals on the Behavior of Short RC Columns Strengthened by External CFRP [Volume 36, 2A, 2018, Page 223-233]
Satchet, Murtadha S.
Geomatics Techniques to Evaluate Bus Service Coverage A Case Study on Nasiriyah, Iraq [Volume 36, 11A, 2018, Page 1148-1157]
Sayhood, Eyal K.
Shear Strength of Concrete Deep Beam Subjected to Uniformly Distributed Load [Volume 36, 2A, 2018, Page 125-135]
Shaher, Aya A.
Investigation of Addition Different Fibers on the Performance of Cement Mortar [Volume 36, 9A, 2018, Page 957-965]
Shaker, Khitam S.
Synthesis and Characterization Nano Structure of MnO2 via Chemical Method [Volume 36, 9A, 2018, Page 946-950]
Shaker, Suaad S.
Effect of Laser Pulses on Characterization of Zincoxide Thin Film Prepared by PLD [Volume 36, 1B, 2018, Page 93-98]
Shakor, Zaidoon M.
Applying Modern Optimization Techniques for Prediction Reaction Kinetics of Iraqi Heavy Naphtha Hydrodesulferization [Volume 36, 11A, 2018, Page 1171-1175]
Shandal, Shereen A.
Size Miniaturized Fractal Nested Circular Rings-Shaped Microstrip Antenna for Various Wireless Applications [Volume 36, 11A, 2018, Page 1176-1184]
Shareef, Ali H.
Study The Effect of Traditional Iraqi Stabilizers (Cement and Lime) on Some Properties of Iraqi Clay Soils [Volume 36, 3A, 2018, Page 248-255]
Shareef, Sarah M.
Intrusion Detection System Based on Data Mining Techniques to Reduce False Alarm Rate [Volume 36, 2B, 2018, Page 110-119]
Shareef, Zain. M.
Full State Feedback 𝐇𝟐 and H-infinity Controllers Design for a Two Wheeled Inverted Pendulum System [Volume 36, 10A, 2018, Page 1110-1121]
Sharif, Najlaa R.
Determination of Radon Concentrations in Soil Around Al-Tuwaitha Site Using CR-39 Detector [Volume 36, 2C, 2018, Page 108-112]
Shather, Saad K.
Investigate WEDM Process Parameters on Wire Wear Ratio, Material Removal Rate and Surface Roughness of Steel 1012 AISI [Volume 36, 3A, 2018, Page 256-261]
Sh. Hamadi, A.
Study the Dye Decolorization of Wastewater Using Bentonite, H2O2, Ultrasonic and Laser Techniques [Volume 36, 1A, 2018, Page 41-45]
Shuraiji, Ahlam L.
Investigation and Analysis of Force Production Mechanism for Partitioned Stator Flux Reversal Permanent Magnet Linear Machine [Volume 36, 9A, 2018, Page 991-996]
Sivakugan, Nagaratnam
Comparison Between Deterministic and Stochastic Interpolation Methods for Predicting Ground Water Level in Baghdad [Volume 36, 12A, 2018, Page 1222-1225]
S. Jabir, Majid
Antioxidant activity of Linalool [Volume 36, 1B, 2018, Page 64-67]
Subhi, Auday T.
Determination of Radon Concentrations in Soil Around Al-Tuwaitha Site Using CR-39 Detector [Volume 36, 2C, 2018, Page 108-112]
Sulaiman, Mariam T.
Propose an Arabic CAPTCHA System based on Chaotic Maps [Volume 36, 1B, 2018, Page 48-52]
Sultan, Khaliid F.
Performance Evaluation of the V–basin Tube Solar Collector by Using .Different Nanoparticles and Base Fluids [Volume 36, 4A, 2018, Page 461-470]
Sultan, Khaliid F.
Evaluation and Improvement Performance of a Boiler in a Thermal Power Plant Using Artificial Neural Network [Volume 36, 6A, 2018, Page 656-663]
T
Taha, Ahmed A.
Resistance of High-Volume Fly Ash Self-Compacting Concrete to Internal Sulfate Attack [Volume 36, 12A, 2018, Page 1260-1266]
Taha, Ali A.
Antioxidant activity of Linalool [Volume 36, 1B, 2018, Page 64-67]
Talib, Saja A.
New Strategies for Associative Memories [Volume 36, 2A, 2018, Page 207-212]
Tawfiq, Esam A.
Effect of Temperature and Concentration on the Optical Properties of PVC Solutions [Volume 36, 2B, 2018, Page 170-174]
Toama, Hijran Z.
Studying the Efficiency of Lime-Soda Sinter Process to Extract Alumina from Colored Kaolinite Ores Using Factorial Technique of Design of Experiments [Volume 36, 5A, 2018, Page 500-508]
Toama, Hijran Z.
Beneficiation of Low Grade Calcium Bentonite Claystone [Volume 36, 5A, 2018, Page 546-554]
TWFEQ, MOFAQ ALI
Grasping Force Controlling by Slip Detection for Specific Artificial Hand (ottobock 8E37) [Volume 36, 9A, 2018, Page 979-984]
W
Waheed, Mohanned Q.
Development Bearing Capacity of Piles Embedded in Clayey Soil [Volume 36, 3A, 2018, Page 315-321]
Waheed, Mohanned
Comparison of the Behavior for Free Standing Pile Group and Piles of Piled Raft [Volume 36, 4A, 2018, Page 373-380]
Y
Yass, Shaimaa
Generalized Dependent Elements of Generalized Reverse Derivation on Semiprime Rings [Volume 36, 1B, 2018, Page 88-92]
Younis, Kariem M.
Metal Flow Control in Producing the Non Symmetrical Parts in Deep Drawing Process [Volume 36, 6A, 2018, Page 603-611]
Younis, Kariem M.
Experimental and Numerical Study of the Earing Defect During Square Deep Drawing Process [Volume 36, 12A, 2018, Page 1267-1275]
Younis, Sudad
Some Mechanical Properties of Polymer Matrix Composites Reinforced by Nano Silica Particles and Glass Fibers [Volume 36, 12A, 2018, Page 1283-1289]
Yousif, Ahmed S.
Analysis and Simulation of Unmanned Aircraft Propeller Motor Using PSIM [Volume 36, 10A, 2018, Page 1081-1090]
Yousif, Zainab
Drag Reduction Study of Xathan Gum with Polydiallyldimethylammonium Chloride (PDDAC) Solutions in Turbulent Flow [Volume 36, 8A, 2018, Page 891-899]
Yunus, Robiah
Potential of Ethylhexyl Ester Oil to Enhance Drilling of HTHP Wellbores [Volume 36, 1C, 2018, Page 30-37]
Z
Zainulabdeen, Ahmed A.
Experimental Study for the Effects of Crystalline Agents on Properties of Glass-Ceramic Coating [Volume 36, 2A, 2018, Page 179-184]
Zankana, Sara D.A.
Environmental Impact Assessment for Brick Factory in Baghdad, Iraq [Volume 36, 1C, 2018, Page 38-48]
Zhu, Zi Qiang
Investigation and Analysis of Force Production Mechanism for Partitioned Stator Flux Reversal Permanent Magnet Linear Machine [Volume 36, 9A, 2018, Page 991-996]
Ziboon, H.T.
A Multiband Printed Slot Antenna Loaded with Trapezoidal Slots for WLAN and WiMax Applications [Volume 36, 1A, 2018, Page 55-59]
